I made a neon sign!
I started by laying all the glass parts out in the layout I wanted.
I then made sure I had everything I needed.
I got a piece of mdf, and traced out my design.
Its not the best design, but its only for size and dimension referencing for cuts.
I made a nice boarder around the neon, where I wanted to cut it out.
I got out my Scroll saw and cut out the sign.
Next was to sand off the markings.
That sure took a while.
Now a nice coat of paint.
Its looking good.
I started by laying everything out and getting good placement.
Then I secured the glass, and wired it up.
So far so good…
And it looks great!
You must log in to post a comment.